Zhangjiagang Leyu Yiyi Machinery Factory
Service Hotline:18706246515
Banner
Home > news > Content

What should you pay attention to when using PE mill?

Edit:Zhangjiagang Leyu Yiyi Machinery FactoryUpDate:2019-10-14

What is a PE mill , many people may not be very clear, it belongs to the flat grinding disc mill series, is the ideal equipment for processing and grinding thermoplastic plastic, so what should we pay attention to when using PE mill? Question, what to do with the problems that arise.
PE grinding machine should pay attention to the rolling condition of the disc during the daily operation. Because the material of the material is different, the rotation speed of the disc should be controlled within a reasonable range according to the specific regulations of the pulverizer. It quickly affects the granularity of the product.
Because the pulverizer belongs to the wet granulation model, the upper part of the disc is generally equipped with a spray device, which is used to wet the material to increase the viscosity of the material. It is considered that the material has excellent adhesion, and the spray equipment should be frequently viewed. Ensure that the water in the spray equipment is unobstructed.
In the process of using the PE pulverizer, it is particularly necessary to pay attention to the transmission components, that is, the transmission large gears. The rolling of the transmission large gears is completed with the assistance of the lubricating oil, so in the process of working on the large gears, it must be periodically Check its lubrication status.
The whole structure of the pulverizer is supported by the frame. When the machine is working, pay attention to check whether the anchor bolts connected to the frame and the foundation ground are tight or not. If the bolts are loose, be sure to tighten them in time. Otherwise, the plastic pellet machine will produce intense vibration and noise when it is working. It should be checked whether the parts of the machine are lost during the transportation and whether the bolts are loose.
The PE mill rolls the spindle pulley to see if there is a collision when rolling. Check if the scroll direction is correct after wiring the machine motor. The crusher is forbidden to be mixed with iron and debris due to the pulverized material, and an abnormal sound is emitted, and the machine should be stopped immediately.
Often pay attention to the protection of the mill to avoid some machine failures, and then better put into use.


Address:Zhangjiagang Leyu Development Zone  TelePhone:18706246515  MobilePhone:18706246515  E-mail:1360565135@qq.com

Mobile