Zhangjiagang Leyu Yiyi Machinery Factory
Service Hotline:18706246515
Banner
Home > news > Content

What is the usage process of the plastic mill?

Edit:Zhangjiagang Leyu Yiyi Machinery FactoryUpDate:2019-09-09

Any mechanical equipment has its own fixed use process, and only the operation according to its set-up process can make the machine work normally. After working for a period of time, the plastic mill should periodically check the equipment to prevent equipment failure and eliminate the possibility of malfunction during work. So, what is the process of using the plastic mill?
The working procedure of the plastic grinding machine 1. The plastic grinding machine should be firmly equipped with the power unit. If the plastic grinding machine needs long-term work, the plastic grinding machine should be firmly fixed by cement.
2. If the plastic mill is working in liquidity, the unit should be installed on the angle iron seat made of steel, and it should be adhered to the same reversal plane of the belt slot of the power machine and the plastic mill.
3. After the plastic mill is finished, check whether the machine is loose. If it does not meet the requirements, it should be adjusted in time.
4. Before the plastic mill is started, first roll the rotor by hand to see if the claws, hammers and rotors are sensitive and reliable in the operation. Whether the rotation direction of the rotor is consistent with the direction indicated by the machine arrow, power machine and plastic Whether the lubrication between the crushers is outstanding.
5. After the plastic mill starts to run, after a few seconds of idling, if there is no abnormality in the feeding.
6. After the plastic mill is working, always pay attention to the working condition of the mill, and keep it even when feeding.
The use of plastic mills is suitable for the recycling of plastics such as boxes, thin pipes, blow moldings, bottles and shells. The plastic mill is easy to operate, the blade is simple and quick, the structure of the flat knife is suitable for crushing large-volume thin-walled and thin materials, and the crushing power is improved. The electric control safety planning is adopted, and the hopper adopts double-layer structure and is filled with soundproof material. The motor is equipped with an overload protection device and the power supply device has outstanding safety and environmental protection, and is energy-saving and durable. "

Address:Zhangjiagang Leyu Development Zone  电话:18706246515  MobilePhone:18706246515  E-mail:1360565135@qq.com

Mobile