Zhangjiagang Leyu Yiyi Machinery Factory
Service Hotline:
Home > news > Content

How to eliminate the failure of PE mill

Edit:Zhangjiagang Leyu Yiyi Machinery FactoryUpDate:2017-02-20

PE mill trouble cleaning Because the working environment of PE mill is very bad, if there is equipment failure in the local operation of PE mill, how to remove PE powder The failure of the machine is a problem we are very concerned about, and the in-depth study of the PE mill by the PE mill technicians of our factory has finally solved the cleaning method of the failure of the PE mill. First, ensure the normal working load. :
Be careful not to work under the heavy load that the machine can withstand, and use the machine as far as it can. It is necessary to ensure the uniform addition and subtraction of the mechanical load, so that the machine is in a relatively steep load change. Specifically, it is necessary to add and subtract materials more evenly, and it is not possible to overload the feed to prevent the ups and downs of the motor and the working device.
Second, to ensure a reasonable smoothness of the machinery:
Normal and reasonable smoothness is one of the useful measures to reduce mechanical failure. To this end, it is necessary to use smoothing agents reasonably. According to the different types of machinery and the structure of use, the normal smoothing agent category should be selected. According to the requirements of the machinery, the appropriate quality group should be selected, and the appropriate quality grade should be selected according to the requirements of the machine. Choose the right smoothing grade for the work environment and different seasons. In use, neither low-grade smoothing agents nor other types of smoothing agents can be used, and defective products can not be used.
Third, when the maintenance:
The machine will inevitably present a variety of faults during use. Among these failures, the impact of some faults on mechanical equipment may be very small, some of which are more serious, and may even lead to a major accident in which the machine is destroyed. The faults presented should be dealt with in a timely manner. The so-called treatment is to follow the maintenance procedures.
Regular maintenance and repair of the machinery, maintenance and repair of various groups must be carried out according to requirements; in the process of use, it is necessary to strengthen the regular and irregular inspection of the milling machine such as PE mill, and timely understand the operation of the machine. For temporary failures, it is necessary to deal with them in a timely manner. Do not delay the maintenance of the machine due to small failures and no impact on the use, resulting in a larger failure.

Address:Zhangjiagang Leyu Development Zone  电话:  MobilePhone:  E-mail: