What should I pay attention to when using a PVC mill?
PVC mill users do not specifically read the instructions when using them. Maybe there will be no problems in the early stage. As the mill is put into use, some problems will occur in the later period, which will delay the production. Reduced income.
Plastic mill use and precautions:
1. First of all, the operator should have relevant knowledge of use, and generally understand the performance of the plastic mill and general troubleshooting.
2. Before starting the machine, the system should first check the following aspects: Whether the plastic pulverizer and the power unit are firm, you must check whether the fastening parts of the plastic mill are firm: whether the signal is sensitive, check whether the rotor is sensitive, the belt Whether there is collision in the body such as tightness, and whether various safety measures are in place.
3, the official start of the trial run before production: 2-3 minutes after the start of the idling, check whether the plastic mill is abnormal, whether the temperature is too high, whether there is improper collision, whether the sound is too large, rolling is sensitive.
4. After the plastic mill is officially put into production, the following rules should be followed: the feeding should be uniform, the material should not be too large, and it should not be too much, in case the load is too large or the screen is stuffed. And it is not suitable for full-time production at full time, and pay attention to the distance in the middle. If the sound is suddenly abnormal or sprayed in the production of the machine, immediately close the power supply and stop the machine. No abnormalities are guaranteed to be produced. If a similar situation occurs multiple times, ask the technician to check it.
5, the plastic mill is not used for a long time, please pay attention to the lubrication and maintenance, etc., should not be placed in a humid place.
Previous: What is the closed-circuit grinding process of the PS mill?
下一条: What are the advantages of plastic mills compared to similar mills?
Related Industry Knowledge
- What are the common problems encountered in the cutter grinding opportunity?
- What are the reasons for the development of the grinding disc mill?
- How should the milling efficiency of plastic mills be improved?
- Precautions during the use of PE mill
- How should the service life of plastic mills be extended?
- Grinding disc mill purchase tips sharing
- Pvc mill is the best choice for enterprise development
- What factors will affect the efficiency of the cutter mill
- The use and characteristics of the grinding machine during grinding
- Single disc mill common fault
- What is the closed-circuit grinding process of the PS mill?