About the troubleshooting of plastic mill

Due to the extremely harsh working environment of the plastic grinding machine, if the operation of the plastic grinding machine is not properly performed, the problem of equipment failure will occur. Then, how to eliminate the failure of the plastic mill is a problem we are very concerned about now, and the in-depth study of the plastic mill by the technicians of the plastic mill finally dealt with the problem of the plastic mill. Let's talk about it.
First, to ensure normal operating load:
It should be noted that mechanical work cannot be performed under mechanically loaded loads. The addition and reduction of mechanical loads must be ensured so that the machine is in a relatively slow load change. Specifically, it is to increase and decrease the throttle more evenly, and to avoid the lifting movement of the engine and the working equipment.
Second, to ensure the mechanical lubrication:
Normal and reasonable lubrication is one of the ways to reduce mechanical problems. Therefore, the lubricant should be reasonably selected, the general lubricant type should be selected according to different types of machinery and application structure, and the appropriate quality group should be selected according to the requirements of the machine, and the appropriate quality grade should be selected according to the selection. For the requirements of the machine, select the appropriate lubricant grade according to the working environment of the machine and different seasons. In use, neither low grade lubricants nor other types of lubricants nor residual products can be used.
Third, timely protection:
In the process of using machinery, there must be a variety of faults. Some of these failures have little or no impact on mechanical equipment, and some may even cause serious mechanical consequences. Timely handling of the problem, the so-called timely treatment is in accordance with the repair procedures, regular maintenance and repair machinery, all repairs and maintenance must be carried out in accordance with the requirements; in the course of use, should be strengthened. Timing and irregular inspection of the pulverizer and other pulverizers during use. Mechanical operation, short-term failure, should be handled in a timely manner, can not be lost due to small.