How should the milling efficiency of plastic mills be improved?

In the grinding production, the higher the milling efficiency of the plastic mill, the greater the output, and the greater the economic benefits of the user. It can be said that the milling efficiency of the plastic mill is directly related to the user's benefits. Therefore, further improving the milling efficiency of the plastic mill is a concern of every user.

A. Prevent excessive particle size. In the production of flour, if the particle size of the material is too large, in the process of grinding and milling, not only will the difficulty of grinding and processing of the material be affected, but the grinding power will be low, and the material may not be thoroughly ground, which will affect the quality of the powder. . Therefore, regarding the larger particle size, we must first use a jaw crusher for crushing to further increase the grinding power.

B. Adhere to the uniformity of feed rate. In the process of feeding the plastic mill, if the feed rate is too fast, or the one-time feed is too large, it will cause it to gather together in the grinding chamber, and under the same conditions, The grinding speed of the material is slowed down, which affects the grinding power. However, if the feed rate is too slow and the feed amount is too small, the material in the grinding chamber will be broken, which will directly affect the efficiency and output of the plastic mill. Therefore, adhering to the uniformity of feed rate is an important way to improve the milling efficiency of plastic mills.

C. Prevent the grinding roller ring from being severely worn. In the process of using the plastic mill machine, the grinding ring is in direct contact with the material. With the work of the plastic mill, the wear of the grinding ring is also increasing. Once the grinding ring wear is severe, it will result in insufficient grinding, extending the milling time, and then reducing the milling efficiency of the plastic mill. Therefore, the wear condition of the consumable parts is often checked, and the parts with severe wear are replaced in time to further improve the milling efficiency.